High tech for FAIR © Photo: Babcock Noell Superconducting magnet for SIS100 particle accelerator © Photo: G. Otto/GSI Helmholtzzentrum für Schwerionenforschung GmbH Cryo-collimator Cutting-edge technologies [...] as information and superconductor technology. Superconducting magnets and an ultra-high vacuum The SIS100 ring accelerator and many experiments need superconducting magnets in order to guide the extremely

© © GSI/FAIR Ring Accelerator SIS100 The SIS100 ring accelerator runs along an underground tunnel whose floor lies as deep as 17 meters under the earth’s surface. The SIS100 has a circumference of 1,100 [...] light. The SIS18 ring accelerator, which has a circumference of 216 meters, accelerates particles to speeds as high as 90% of the speed of light. The ions can then be shot from the SIS18 into the SIS100 ring [...] particles, so-called secondary particles. © © GSI/FAIR, Zeitrausch SIS100 particle accelerator, Visualization © © GSI/FAIR, Zeitrausch SIS100 particle accelerator, Visualization Secondary particles A key

superconducting SIS100 accelerator of FAIR K. Sugita, P. Schnizer, J.P. Meier, A. Bleile, A. Mierau and E. Fischer IEEE Transactions on Applied Superconductivity 24 (2014) 4100105 SIS100 dipole manufacturing: [...] magnets for the SIS100 synchrotron and the NICA project E. Fischer, H. Khodzhibagiyan, P. Schnizer and A. Bleile IEEE Transactions on Applied Superconductivity 23 (2013) 4100504 2012 SIS100 dipole magnet [...] Experimental results on the development of superconducting NbTi/Cu-Mn/Cu wires for magnet systems of SIS100 and SIS300 synchrotrons at FAIR L. Potatina, V. Pantsyrny, N. Shikov, A. Salunin, I. Gubkin, V. Korpusov

consisting of the UNILAC linear accelerator that accelerates particles from H to U up to 11 MeV/u, the SIS18 synchrotron for further acceleration up to energies of 2 GeV/u, and the experimental storage cooler

GSI und FAIR gefallen hat. Praktikumsbericht von Jorin Volke (Praktikum in 2018 in der Abteilung SIS100/SIS18, Laser Cooling) Praktikumsbericht von Lisa Peter (Praktikum in 2018 im Laserlabor) Praktikumsbericht

mCBM@SIS18 - A CBM full system test-setup for high-rate nucleus-nucleus collisions at GSI/FAIR A CBM full system test-setup called mCBM@SIS18 (”mini-CBM”, shortened to mCBM) is presently being installed [...] installed at the SIS18 facility of GSI/FAIR. The mCBM experiment will allow to test and optimize the performance of the detector subsystems including the software chain under realistic experiment conditions which [...] which will significantly reduce the commissioning time for CBM at SIS100. mCBM has been recognized as a FAIR Phase-0 experiment and the beam time application (proposal S471) submitted on June 19th , 2017

System (STS) Data Acquisition (DAQ) First Level Event Selection (FLES) Simulations Engineering mCBM@SIS18

xp-RRF_2023_LF1_V10.pdf 2022 Machine investigation with 238U Beam at the UNILAC 2021 Beam Dump of SIS18 PRIDE: User request for LEBT switching magnet (MU2) Machine Investigations with 238U-Beam at the

Office: KBW 4.001 Phone: +49-6159-71-2652 Email: P.Senger(at)gsi.de Christian Sturm Project leader mCBM@SIS18 Office: KBW 4.030 Phone: +49-6159-71-2661 Email: C.Sturm(at)gsi.de Maksym Teklishyn STS Group Office:

the committee has made its evaluations, GSI will set aside a total of 160 hours of beam time at the SIS-18 accelerator in 2018 and 2019 for the selected proposals. Presentation © Photo: G. Otto GSI Helm